Vision (500ml)
- Regular price
- RM 163.35
- Sale price
- RM 163.35
- Regular price
-
RM 0.00
Share
A unique compound that is Self-Diminishing able to achieve its highest cut with much gloss and silky feeling on the surface. There are some limitations to create a compound that is Universal and adaptable to all Clear Coats. In some clear coat, VISION creates swirls. In some, it is perfect no possible scratches at all. For a certain clear coat, the pad has to be primed and in some certain clear coat, only 2-3 pea-size drops of compounds is needed. In view of the sharpness of the granules, VISION has to be understood by much testing. Following are the recommended methods as we had done the testing and understand how to use such a unique compound.
FURY WOOL
FURY WOOL is a far better cutting media than Foam pad. if the surface is extremely hard and requires heavy correction, you need to prime the pad and spread to a wider area as much as possible as the compound has a low viscosity, so it spreads well. Polish and allow the compound to work on the surface longer. During polishing when the compounds look like water, it goes to show it is fading. Here you can stop and wipe away. To start polishing at a slow speed then gradually higher and end with a slow. Speed. For RO is 1000/1200max and for DA is 2000/4000max.
FURY OG (Orange)
A medium-hard pad would require 3-4 pea size to achieve One Step. In view of it is a medium-Hard pad, the granules tend to break slower. So, it warrants lesser compound but yet achieving the results in High glossy cut. Speed for RO is 1000/1200max and for DA is 2000/4000max. To start polishing at a slow speed then gradually higher and end with a slow speed. For RO is 1000/1200max and for DA is 2000/4000max.
Apricot & Yellow
These two are Closed-cell pads (Non-Reticulated). Apply only 3-4 pea-size which is sufficient for a good size panel. The compound would finish fast in view it is closed cell. Always allow the compound to work on the surface until fades. To start polishing in a slow speed then maintain at low speed as the pads are close cell. For RO is 1000max and for DA is 2000max.